How to fix belkin blinking Orange?

first you need to understand what the lights on router mean?

green/blue–connection status(either you connected with wireless or with ethernet cable)

orange/red—could be a connection problem or issue with your modem.

keep in mind that not all routers are configured and manufacturer equally.

Follow the instructions to fix the problem.

1. power cycle the device

  1. unplug the power cable to turn off your modem and wait for 2 minutes.
  2. connect the router to modem using ethernet cable.
  3. using another Ethernet cable connect router and computer.
  4. Power up your modem and Router by plugging in its power supply.

2. Connecting to your router

  1. For wired connection :connect the computer to the router or modem by using the Ethernet cable.
  2. For wireless connection :On your computer, you can see a new Belkin network click on that.

Note :- If you are not reconnected or not seeing any new belkin name, at this time; you need to reset your router.Read more for How to reset belkin router?

visit to see the router homepage. Now you can setup the router as a new router.visit here for setup belkin router.

belkin blinking orange inner
Change the setting accourding to you.
  • Restart the Belkin router and modem and see if this will work or not

For the best results, place the Router next to your modem in an open location, away from large metal objects and magnets such as those found in speakers. To improve the strenghth of your wireless signal raise the router above floor level.I think you are not failed until you quit trying.I believe this will helps you


Get Belkin Support | Belkin Tech Support | Contact For Belkin Help

Hello Belkin Users,

Are You Looking For Belkin Support?

If Yes Then You Are On the right Place –

Belkin Support –

We have a solution for all kind of Belkin router problems and we are so much committed to Get You Help With all kind Of Router Troubleshooting.

Belkin support helps you to Troubleshoot Belkin router And Get the Internet back to your home Or

Problems We Solve With Router –

  • Belkin Router Setup And installation
  • Internet Speed Problems With Belkin Router, Internet Connectivity Problems.
  • Belkin USB Adaptor and Its Configuration.
  • We Also Help you troubleshoot Belkin router with various Problems Like Speed, Network Coverage
  • We Can Help You With Belkin Range Extender Installation and Its Configuration.
  • Belkin router password Reset And Password setup.
  • Help With Belkin wireless port forwarding
  • Fix Belkin wireless Blinking Orange Or Yellow light.
  • Belkin router Firmware Update

You Can Get Belkin Support For All kind of Belkin Router Related Problems.

Belkin Router Basic Troubleshooting –

These are few Steps That You Can Try To Fix Belkin Router.

  • Turn Off The Belkin Router And disconnect All Cables
  • Restart the Belkin router Along with your internet modem
  • Now Plug Everything Back As it was Before.
  • Restart your Computer and devices And try to connect with your network.

Read More How To Reset Belkin Wireless Router?

After you have Tried Basic Steps Please Checkout These Steps To Reset Belkin Router

Belkin Router Reset –

  • Press The Reset Key At The back of your wireless router And Hold for 30 sec
  • After Hard Reset restart the router and Computer Along with modem.
  • Now Its Time To Re-setup the Belkin router.

Read More how to set up Belkin wireless router

After Belkin Router setup We Recommend You to update the Belkin router Firmware –

Read More Belkin Router Firmware Update

Comment Below For Any Kind Other Help and Belkin support.

Thanks For Reading


How To Setup Belkin Range Extender ?

Hello Friends,

this is something almost anyone Who has ever used wireless Router can relate. Having a Big House Or Thick Walls Can often be the reason of Slow & Laggy Wireless Internet Connectivity & this is where Range extender come in the Game.

The range extender is Also Know as Network Repeater Or Network Booster. Range Extender Is An Plug And Play Device & Easy to Configure-

A router Connects With Modem & Spread the internet Connectivity all Over Under its Range But a Range extender Communicates with router & Extend the network Range & Strength.

Belkin Does Provide a Wide series of Range extender that Suites the Need of ever home Users so You have made a great Choice by Gettings a Belkin extender.

Today in this Post we Will explain How one Can Install Belkin Range extender is Easy steps –

Belkin extender Installation Requirements-

Before we Provide you all Steps Required for Extender Setup just make sure you Have these Key Ingredients Ready-

  • Active & Working Internet Connection (I.S.P )
  • Working Wireless Router & Power Coulet
  • Device Like Computer, Phone Or Table to access Web-based Extender settings.
  • Default Belkin extender Gateway (https //belkin.range) Or Ip.

Note – If it’s an Old Belkin Extender We Recommend You to Reset Belkin Range extender to Default Settings 

How To Setup Belkin Range Extender-

  • Plug the Belkin extender to Power Source & Turn it on.
  • Go to Your Laptop Or Phone & Search for Available Network In Your Network List 
  • Find the Unsecured Belkin Extender Network By the Name of Belkin.setup & Connect With it.
  • Once Connected Please Open your Favorite Internet browser and Type https//Belkin.range in the address Bar to access Belkin Web-Based Console.
  • Login Belkin Extender Setup & Follow the on-screen Instruction to set up Belkin extender.
  • Select the Network Name of your main Existing Router & Type the Wireless Password of your main Router.
  • Save the instructions and restart the extender.
  • Place your extender In the middle of the House & Enjoy the Extended Network.

Now You can Place your Range extender Anywhere around your Home. 

You can also Install Belkin extender using WPS Key. Read Some More Guides – Belkin Extender Setup 

Hope all of this Helps you find the Help you Needed.

Good luck 


How To Reset Belkin Wireless Router ?

Hello Belkin Users

In Case You Want To Reset Belkin Router We Can Help You Reset All Setting In Your Belkin Router .

Its Very Easy With Belkin Support And Guides –

Lets Get Started to Reset Belkin WiFi Router –

 How To Reset Belkin Router-

Dear Friends There Are Two Ways to Reset Belkin Router

A- Hard Reset

B- Soft Reset

Tips –Do Remember Most Of the Belkin Router Connectivity Problems Can Be Resolved By Restarting Or Firmware Update.

Read More Why Belkin Router Is Not Working

Hard Reset Belkin Router –

Dear Friends

See If That Helps You to Fix Your Belkin Router .

Factory Reset Belkin Router (Soft reset)

  • Just Open the Belkin Router Setup Page Using .
  • Go to the Router Maintenance and Settings
  • Now There You Can See Option to Reset Belkin router to default Factory settings .
  • Restart the Belkin router and setup It Again By Given Steps .

Great ,

Your Belkin Router Has Been Reset Now-

Please Setup And Change the settings In  Your Belkin Router Now

You Can Change Password (Network Key) And Network Name (SSID) And All the Settings that You Wish .

After Setup Your Belkin Router Please Restart All Your Devices In Your Home .

If You Don’t Need Please Turn Off The Guest Network .

Make Sure You Update the Latest Firmware On Your Belkin Router While You Setup Your Wireless Router .

See After All These steps Your Belkin Wireless Router Start Working .

If All This Did Not Help Read Official Belkin Support visit

Please Comment Below And Let Us Know If You Need More Help To Reset Your Belkin Router .

Thanks For Your Time

Gud Luck


How to Setup Belkin Router ?

Hello Guys

Got a New Belkin Router? Maybe you are just Trying to set up an Old Belkin router. Setting Up Belkin Router Is quite Easy With Right Steps –

in this post, we will Help you install Belkin wireless router & Explain On How to Troubleshoot Installation Problems at the same Time.

Things You Need to Setup Belkin Router

  • Active internet Connection & internet service Provider
  • Laptop, Tablet Or Smartphone
  • Power Outlet & Ethernet Cable (Optional)
  • Default Belkin Router Ip
  • Must Know Internet Connection Type (Ask Your Provider)

Most of the time the instructions are given on the Box that Came With Belkin Router However our Post will Clarify all those steps to You

Setup Belkin Wireless Router-

You can use Same steps Given below to Configure almost any kind of Belkin Router. You Can setup Belkin router using Any Phone Or Tablet With Full Browser Such as Chrome, Safari, firefox Etc. Without an extra ethernet Cable.

Note – If you have an Old Belkin Router than we Request you to Reset the Belkin Router to Factory Default Settings Before Installation

  • Plug the Belkin Router to Power Source & Turn it On.
  •  Connect The Belkin Router Using Cable To Your Modem Using The Ethernet Cable (internet cable ).
  • Use your Phone Or Laptop & Please Check your Wifi Network List & Connect With Unsecured Belkin Network.
  • Pull up the Internet Browser of your Choice & Type & Press Enter.
  • Once Logged in Let the Router Detect the Modem Internet Connection Type & Settings.
  • Follow the Onscreen Instructions to Setup Belkin Router With your Modem
  • You Can Set up the Wireless Password (network key ) and SSID (network name) While installation.
  • Save The Settings And Restart The Router.

Tips – Please Lock your Belkin Dashboard for Extra Security So that only you can access the Belkin Router Console.

  • Turn off The Guest Network If not Needed

Update the Belkin firmware to the Latest version available

Your Router Should be ready to Use.

Perform the same steps when using Mac Computer to Setup Belkin Wireless Router.

in any case, if the installation is failed Please Reset Belkin router & Try the same steps Again

See If All This Information Helps You to Setup And Configure Belkin Router.

Thanks for your Time

Good Luck